Double Glazing Window Locks Repairs
Double glazing window locks repairs are crucial to keep your home secure. Insecure handles or hinges could allow drafts into your home and leave your windows vulnerable to burglars.
Fortunately, you can repair the stiffness of uPVC handles or locks without having to replace the door or window. In most cases, cooling or lubricating your mechanism will solve any problems.
Broken Glass
Over time, double-glazing window locks can wear out. The handles may become difficult to open, or even close. This could cause problems with ventilation, and could also create a security risk. It is crucial to have the window repaired as soon as you can.
Double glazed windows consist of two or three glass panes with gas between them to provide insulation and an elastomer seal that holds the panes joined. If you notice condensation between the glass panes it is likely that one of the seals needs to be replaced. This typically involves replacing just one pane of the window, which is much cheaper than replacing the entire glass window.
Condensation and cloudiness are usually the result of a broken seal on double-glazed windows. This can be caused by a variety of reasons, such as air leaks or excessive humidity in the home. When you first notice the problem, it's important to contact a double glazing expert to repair the gas seal and seal in your double-glazed windows.
It is possible to replace just one pane of double-glazed glass, but this is not recommended without the help of a specialist. This is because it requires specialized tools and the proper expertise to do the job safely. If you attempt to do it yourself, it could result in damage to the window's frame, or even to your own health.
A lot of people use the crowbar to open their double-glazed window when it's stuck but this will usually leave the window frame damaged and scratched. A specialist in window repair can remove the handle from the window and open it without causing further damage. They can also change old window mechanisms to modern ones.
Window hinges can become stiff and difficult to open after a while, especially if they are in a noisy location. To stop this from happening, it's a good idea to grease the hinges regularly with silicone spray. Be careful not to close the window using the handles or by closing it with a lot of force. This could damage the hinges.
Broken Sash
This is a common problem for older double glazing windows. It can be difficult to lock and open a windows if the upper sash is not in of its pocket. This usually happens due to pins being disengaged or a balance shoe has been disconnected. Each sash is unique and it is important to know how yours are set up before trying to fix it.
This can be resolved by removing the sash, and cleaning it thoroughly. This will also show whether the sash is a good match. If not, you'll need to add sash stops to help keep it in place. They are available online or at most hardware stores. After cleaning the sash, you can replace the parting beads and lubricate the pulley axles by using Teflon or silicon spray. Label the weights prior to removing them to ensure that you are able to reinstall them correctly.
Another common issue is a broken handle. It's difficult to determine if your window handle is broken, but there are some indications. If the handle is difficult to use or feels clunky or doesn't feel like it's secured to the frame, then it's broken.
It could be due to a lack of use or the handle may have been damaged or broken. In some cases the handle may be internally broken and cannot be replaced. However, Dunstable double glazing repairs is still worth trying to fix the problem as soon as you can.
You may have to unscrew the hinges that hold the window sash to the frame to take it off. It's not an easy task, so you'll require someone to help you hold the sash steady. After removing the hinges, it is necessary to clean the area around them. You should also try to reattach the hinges and test the handle to make sure it's functioning properly. If it's not, you may want to consider replacing it. This will make your window as secure as it can be.
Broken Handle
The window handle is a delicate piece with intricate mechanisms, and it's common for them to degrade or break in time. It is therefore essential that damaged handles are repaired as soon as possible to avoid a inability to function and security issues.
Fortunately, it is not difficult to change a window handle. The window handle can be replaced by anyone with some DIY skills. Unlike the sash which is secured with multiple bolts, a window handle only requires two screws. It is important to test the handle once it is installed to ensure that it functions properly. This includes locking the handle and looking for gaps that might allow drafts in or potential thieves to gain access to your home.
The most common reason for a broken window handle is that it's damaged from use over and over again. A broken handle can be caused by excessive stress or force. Slamming or forcing a window open can put additional stress on the handle, which can increase the risk of injury, so it's always best to carry out every handling task slow and slowly.
Other causes for a damaged handle could be due to poor maintenance, ageing or design issues. The handle may break prematurely due to the absence of regular cleaning and oiling. This is often caused by dirt or other debris that have accumulated over time. The handle could be damaged due to improper installation or alignment issues.
If the fixes previously mentioned don't work then the Tasker may require access to and remove the lock mechanism itself. This could mean removing the window frame or removing the plastic bead and frame (to give more space). A replacement lock may be installed that is a similar profile to the current uPVC handle. The new handle can be put back on and the procedure is complete. If this is the situation then the Tasker will offer a quote for the repair costs.
Faulty Lock
If window locks are damaged, it's crucial to fix the issue as soon as you can. The reason is that a damaged window can lead to the development of draughts and weaken the security of your home barriers, leaving the home vulnerable to burglary. Window lock repair is usually an easy task, but it is better to let an expert handle the issue before it gets worse and will cost you more in the long run.
UPVC window handles are available in two styles including cockspur handles as well as espagnolette handles. The first uses an internal rod to operate the locking cams, which are shaped like mushrooms, that lock into window frame keepers. The latter has a handle attached to a spindle. It protrudes into the rod to activate the lock's cams that resemble mushrooms, also known as locking mushrooms. The latch of the lock then clips into the mortise on a window frame's and catches.
Both types of UPVC window locks are susceptible to damage, particularly in older homes. This can happen if the sash is damaged, warped or misaligned. It can also come loose. In these instances, the lock must be replaced in order to avoid draughts or loss of energy efficiency. A Tasker can replace the defective locks for you and provide you with peace of mind knowing your windows are secure from intruders.
A Tasker will first look at the double glazing of your window to determine the issue. Once they have all the details they require, they'll make their tools ready and then arrive at your home. They'll usually bring a Phillips-head screwdriver, needle-nose pliers wood putty, and fine-grit sandpaper.
If the sash has been misaligned the Tasker needs to loosen the screws that hold both pieces of the lock to the window frame. The Tasker will then detach the latch and then fill the mounting holes (if appropriate) with wood putty before sanding the area to ensure it is identical to the rest of the frame.
If the lock is rusted, they'll clean it using wire brush or oil and then lubricate it with grease to ensure it's running smoothly. They'll also check if the latch is in good condition and then re-install it.
